If you’re getting the Start PXE over IPv4 error when you try to boot your PC, don’t worry. Here are a few solutions to fix the problem.

How to Fix the Start PXE over IPv4

How to Fix the Start PXE over IPv4

If you’re seeing the “Start PXE over IPv4” error, it typically means that your computer is trying to boot from a network source instead of a local hard drive. This can be caused by a number of things, but the most common is that the computer is configured to boot from the network first, instead of from the hard drive.

To fix this, you’ll need to change the boot order in your computer’s BIOS settings. To do this, you’ll need to restart your computer and press a key (usually F2 or DEL) to enter the BIOS setup. Once you’re in the BIOS, look for the “Boot Order” or “Boot Priority” settings and change the order so that the hard drive is listed first. Save your changes and exit the BIOS, and your computer should now boot from the hard drive instead of from the network.

Conclusion

If you’ve followed the steps in this article, you should now know how to fix the Start PXE over IPv4 error. This error can be caused by a number of things, but the most common cause is incorrect boot order in the BIOS. By changing the boot order and making sure that the computer is trying to boot from the correct device, you can fix this error.

Further Reading

If you’re still having trouble getting your computer to boot from the network, there are a few other things you can try. First, check your BIOS settings to make sure that the network boot option is enabled. If it is, try changing the boot order so that the network boot option is first. Finally, if all else fails, you can try using a bootable USB drive or CD with network booting capabilities.

Resources

If you’re trying to fix the Start PXE over IPv4 error, there are a few resources that can help. First, check out Microsoft’s support page on the error. They have a few suggestions that might help, including disabling IPv6 on your network adapter and making sure that your BIOS is up to date.

If Microsoft’s support page doesn’t help, there are a few other options. One is to try running the Windows 10 Network Diagnostics tool. To do this, go to Start > Settings > Update & Security > Troubleshoot. Under the “Network and Internet” section, click on “Network Adapter” and then follow the prompts.

Another option is to try a different boot device. If you’re booting from a USB drive, try a different USB port. If you’re booting from a CD or DVD, try a different optical drive. And if you’re booting from a network location, try a different server or network.

Finally, if none of these solutions work, you may need to reinstall your operating system. This should only be done as a last resort, as it will erase all of the data on your hard drive.

How to Fix the Start PXE over IPv4